Turn your Push 3 into a standalone instrument in just 30 minutes, following our step-by-step guide.
Contents: āØIntelĀ® 11th Gen Coreā¢ļø i3-1115G4 processor with 8GB of RAM and 2x WiFi antennas, lithium iron phosphate battery, 256GB SSD hard drive, heatsink, and all the tools and screws required for assembly.
Shipping weight: 1.750 kgāØ Dimensions: 383 x 218 x 84 mm
Use Push as a control surface for Live on a computer by connecting it via USB.
Specifications:
USB-C to USB-C cable
Length: 100 cm / 39 in
The USB-cable is included in the Push 3 box.
Use the Push MIDI Adapterās 5-pin MIDI jack to send or receive MIDI data from an external instrument.
3.5 mm plug to Type A 5-pin MIDI jack
Compliant with the MIDI Manufacturers Association TRS MIDI Specification.
Length: 23 cm / 9 in
Use the Push CV adapter to send CV from Push's pedal ports to your modular gear. With two adapters you can send up to four CV signals from Push.
Single 6.3 mm TRS plug to dual 3.5 mm TS jacks.
Length: 23 cm / 9 in
Specifications:
Four Encoder Knobs
Height: 1.5 cm / 0.59 in
Diameter: 1.2 cm / 0.47 in
One Volume Knob. Height: 1 cm / 0.39, Diameter: 2.4 cm / 0.94 in.
Specifications:
One Swing & Tempo Knob
Height: 1 cm / 0.39
Diameter: 1.6 cm / 0.63 in
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Supply Base only works in combination with a Power Cable (sold separately).
Specifications:
Input: 100-240 V ~50/60 Hz, 2.0 A
Output: 20 V --- 3250 mA
C8 connector; non-polarized
Length: 150 cm / 59 in.
The Power Supply Base is included in the Push 3 box.
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type A plug to C7 connector; non-polarized (CCC compliant)
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type I plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type G plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type C plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type A plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Push 3 Power Supply Base (sold separately).
Specifications:
Type C plug to C7 connector; non-polarized (KCC compliant)
Length: 150 cm / 59 in
One regional Power Cable is included in the Push 3 box.
White Ableton logo on front, small "Ableton" on back. 100% organic cotton, classic cut.
Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, regular fit.
White Ableton logo on front, small "Ableton" on back. 100% cotton, regular fit.
Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, classic cut.
White Ableton logo on front. 85% organic cotton, 15% recycled polyester
Black Ableton logo on front. 85% organic cotton, 15% recycled polyester
Black Ableton logo on front. 80% cotton, 20% polyester.
Length 1.50m, 100-240VAC, 50/60Hz including 5 interchangeable adaptor tips for North/Central America & Japan, China, Europe, UK, Australia & New Zealand
Length 1.40m, Ableton logo on right-angle connector
Use the Push Adapter Bundle to easily connect Push to multiple pieces of MIDI and CV-compatible gear. Send MIDI data to or from even more devices with the bundleās two MIDI Adapters, and transmit up to four CV signals using the two CV Adapters.